Chifu
This is control top-notch the drone electric search no further than the Speedy bee F405 Mini Flight Tower if you're buying a mini! Manufactured by the drone trusted title this can be accessory; this cutting-edge journey control system was made to help keep you all together control inside the drone for a foundation regular.
Simply 20x20, the Speedy bee F405 Mini Flight Tower is compact adequate to accommodate into maybe the littlest drones, that makes it your decision this is pilots that are perfect need precision extreme accuracy with you should not lose performance. The Chifu Bls 35a element 4-in-1 is electric of journey control system guarantees anyone to absolutely effectively navigate your drone through the environmental surroundings with ease you will get the top in power and price, allowing.
Also, this, this mini journey tower is very rather an easy task to setup, to acquire appropriate up and running in no time right's right. Simply comply with the installation this is easy-to-understand and yourself shall anticipate to choose to try the skies in just moments. Adequate foundation as a result of its degree higher level technology construction top-quality you may not need to be worried about your journey tower deteriorating or failing using your next journey this is big.
The Speedy bee F405 Mini Flight Tower will be the option anyone ideal for a top-of-the-line mini journey control whether or perhaps not you are a experienced hobbyist and on occasion even a drone pilot expert. Featuring its advanced functions, unbeatable power, and easy installation, you may you ought to any challenge on with complete self-confidence and ease.
Product Name | SpeedyBee F405 Mini BLS 35A 20x20 Stack |
Flight Controller | SpeedyBee F405 Min |
ESC | SpeedyBee BLS 35A Mini V2 4-in-1 ESC |
Bluetooth | Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available |
WiFi | NOT Supported |
Wireless FC Firmware Flashing | NOT Supported |
Wireless Black box Dwonload & A | OT Supported |
Power Input | 3-6S LiPo |
Mounting | 20 x 20mm 3.5mm hole size, Compatible with M2 and M3 screws/Silicone grommets |
Dimension | 32mm(L) x 35mm(W) x 14.2mm(H) |
Weight | 13.5g |
ProductName | SpeedyBee F405 V3 30x30 Flight Controller |
MCU | STM32F405 |
IMU(Gyro) | ICM42688P |
USB Port Type | Type-C |
Barometer | Built-in |
OSD Chip | AT7456E chip |
BLE Bluetooth | Supported. Used to connect with the SpeedyBee App for flight controller and ESC parameter configuration. Please make sure the MSP switch on UART 4 is turned on and set to a baud rate of 115200, otherwise Bluetooth functionality will not be available |
Wireless FC Firmware Flashing | NOT Supported. Please connect to the Betaflight configuration on the PC to do FC firmware update |
Wireless Black box Dwonload & A | OT Supported. Please connect to the Betaflight configuration on the PC to do Black box analysis |
WIFI | Not supported |
DJI Air Unit Connection Way | Direct soldering |
DJI Air Unit Compatibility | Compatible with all DJI Air Units: DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1. Please use the solder pads on the front right corner of the flight controller to make a pin-to-pin connection with the solder pads n the DJI Air Unit. UART1(T1, R1) is used for OSD and SUBS(R2) is used for DJI Air Unit’s internal SBUS receiver signal input |
Black box | 8MB Onboard Flash |
BetaFlight Camera Control Pad | Yes(CC pad on the front side) |
Current Sensor Input | Supported. For SpeedyBee BLS 35A V2 ESC, please set Scale=250 and Offset=-500. |
Power Input | 3-6S LiPo. The flight controller is powered through the G, V wires of the 8pin harness or G, V pads from the bottom side of the flight controller. |
5V Output | 4 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side. The total current load is 2A. |
9V Output | 1 group of 9V output, one +9V pad on front side. The total current load is 3A. |
3.3V Output | Supported. Soldering pad named ‘3V3’ on the front top of the flight controller. Designed for 3.3V input receivers. Up to 500mA current load. |
4.5V Output | Supported. Designed for radio receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load. |
ESC Signal | M1 - M4 wires or soldering pads on bottom side. |
UART | 6 sets(UART1, UART2, UART3, UART4(Dedicated for Bluetooth connection), UART5(Dedicated for ESC telemetry), UART6 |
ESC Telemetry | UART R5(UART5) |
I2C | Supported. DA & CL pads on front side. Used for magnetometer, sonar, etc |
Traditional Betaflight LED Pad | Supported. 5V, G and LED pads on bottom of the front side. Used for WS2812 LEDs controlled by the Betaflight firmware |
Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
BOOT Button | Supported. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. |
RSSI Input | Not Supported |
Smart Port / F. Port | Not Supported |
Supported Flight Controller Firmware | BetaFlight(Default), INAV |
Firmware Target Name | SPEEDYBEEF405MINI |
Mounting | 20 x 20mm 3.5mm hole diameter, Compatible with M2 and M3 screws/Silicone grommets. |
Dimension | 30(L) x 32(W) x 7.8(H) mm |
Weight | 9.6g |
ProductName | SpeedyBee 35A BLHeli_S Mini V2 4-in-1 ESC |
Firmware | BLHeli_S J-H-40 |
Continuous Current | 35A * 4 |
Burst Current | 45A(5seconds) |
ESC Protocol | DSHOT300/600 |
Power Input | 3-6S LiPo |
Power Output | VBAT(Battery voltage, used to power the flight controller) |
Current Sensor | Support (Scale=250 Offset=-500) |
Mounting | 20 x 20mm ∅3.5mm hole size, compatible with M2 and M3 screws/Silicone grommets. |
Dimension | 35 * 35 * 5.5mm |
Weight | 7.2g |
FAQ
Q1. How can we know the product quality? A1: We suggest you to order a sample. Also, you can send us email for detail photos for checking if you cannot get enough.
Q2. Is it the final price in the price list? A2: No, there still have some negotiated room. It is depending on the order you placed, the more you placed, the lower price you will get.
Q3. Can you offer OEM/ODM service? A3: YES. The OEM/ODM is welcomed, we can print any logo on the sample as you require.
Q4. Can I get free samples? A4: Yes, some samples are free for customer, but you need to pay for the express fee. For details, please send message to our sales service.
Q5: Can I put my own logo on your paper box? A5: YES, we provide OEM service at low MOQ. but we have few questions need to confirm. 1, Logo color is single color or colorful? 2, you want print logo on product or on package or both want? 3, pls send us the exact order quantity you need. 4, you want we design for you or you can send us design file. 5. once OEM mass order placed, if you need HD pictures for your Oem product to do advertisement.
Q6. How can I send inquiry? A6: When you find something, you are interested, you can click “chat now”, or you can leave your information to us.
Q7. What is your payment? A7: We usually accept payment based on L/ C, T / T, Western Union, PayPal, and Money Gram.
Q8. I want to get your product catalog. A8: So many thanks for your kind inquiry about our products. Pls leave your email or WhatsApp, we will feedback you with catalog within 12 working hours.
Q9: Can you provide your certifications? A9: sure, pls let me know what exactly model you need, then we will provide the certification of the product you want.
Q10. How long will it take to ship to my address? A10: For international shipping, there has air, sea and express shipment. Air, only arrive airport. fast 3 days, slow 5-15 working days. Sea, only arrive harbor. 15-60 working days, based on different line. Express, door to door service. DHL 3-5 working days, others 5-10 working days. also at the same time, we provide air and sea door to door service. customs taxes included service. if you have any interested in, pls kindly contact.
Q11. Do you support drop shipping? A11: Yes! We offer blind drop shipping. In other words, the price or any marketing material related to the supplier will not be included in the package. Pls send us few details so that we can make best quotation for your drop shipment order: 1, what product you want do drop shipment. 2, which country you want do drop shipment. 3, how many pcs you want pack for each order. 4, how many pcs sales you can get for the drop shipment order.
Q12. Do you offer after-sales service? A12: Yes. For the spared parts damaged during shipment, we will send free spare parts for replacements. also technical problem, life time after service support. Any question or need any help, pls always feel free to contact! Best Regards.
Copyright © Chifu Network Technology (Xuzhou) Co., Ltd. All Rights Reserved Blog - Privacy policy
